gear reduction वाक्य
उदाहरण वाक्य
मोबाइल
- Many Japanese automakers phased in gear reduction starters in the 1970s and 1980s.
- Towing packages, with axle gear reduction and cooling additions for heavy loads, were optional.
- The gear reductions mean the final gear will make one revolution in over 2 trillion years.
- Adding to its offroad bite are geared hubs at each wheel for a gear reduction of almost 2 : 1.
- Low-range 4WD gives a gear reduction for the necessary crawling offroad situations or deep mud, sand, or snow.
- The power turbine is connected, without a torque converter, through a gear reduction unit to an only moderately modified TorqueFlite automatic transmission.
- It featured a standard gear reduction drive, a semi-articulated two-bladed rotor system, and a one-person capacity.
- Rock crawling is about slow-speed, careful and precise driving, and high torque generated through large gear reductions in the vehicles drivetrain.
- This design is often seen after a gear reduction, compensating for the lack of acceleration time by delivering more torque at a lower speed.
- They are equipped with an electric motor and a gear reduction unit to reduce the saw blade's rotational speed while maintaining constant torque.
- He introduced the use of small flapping wings providing the thrust for a larger fixed wing; this innovation eliminated the need for gear reduction, thereby simplifying the construction.
- These transmissions take several forms, from pumps driving separate motors, which may incorporate a gear reduction, to fully integrated units containing a pump, motor and gear reduction.
- These transmissions take several forms, from pumps driving separate motors, which may incorporate a gear reduction, to fully integrated units containing a pump, motor and gear reduction.
- At lower speeds, and when stationary, the car produced little to no noise at all, save for a slight whine from the single-speed gear reduction unit.
- It is very commonly implemented in robotics today and used in aerospace as well, for gear reduction but may also be used to increase rotational speed, or for differential gearing.
- More complex versions have a fourth component normally used to shorten the overall length or to increase the gear reduction within a smaller diameter, but still follow the same basic principles.
- A test model was flown with a Wankel engine with a large three bladed 100 inch diameter propeller with a belt driven gear reduction unit and a fuselage-length exhaust canted upward.
- In turboprop engines, a portion of the engine's thrust is produced by spinning a gear-reduction between the turbine and the propeller ( geared turbofans also feature gear reduction ).
- Due to the gear reduction at the wheel which lessens the torque on all the other drivetrain components, the size of the differential casing can be reduced to gain even more ground clearance.
- Other designs use a gear reduction system before the hammer mechanism, most often a single-stage planetary gearset usually with a heavier hammer, delivering a more constant speed and higher " spin " torque.
gear reduction sentences in Hindi. What are the example sentences for gear reduction? gear reduction English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.